, ,

Turf Tracer S Series 48″ Walk Behind TTS600GKA483E0

Made-to-order performance in a floating-deck, hydro-drive mower.
With the Exmark Turf Tracer S-Series, you can choose from four rugged engines including the eco-friendly, Electronic Fuel Injection (EFI), propane Kohler® PCV680. Then, match that power to cutting decks ranging from 36 to 52 inches. In whatever configuration you choose, you’ll get our patented Enhanced Control System (ECS) for ultimate operator comfort. Which translates to day-long operator productivity.
SKU: TTS600GKA483E0 Categories: , ,

Description

SPECIFICATIONS FOR MODEL # TTS600GKA483E0

Equipment
Drive Tires 16 x 7.5-8, 4-ply Turf Master®
Drive Wheel Release Allows unit movement without engine running.
Safety Package Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine
Casters .38″ thick caster yoke arms
Steering Control Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.
Front Caster Tires 9 x 3.5-4, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated mechanical compression.
Electrical 12-volt battery with 15-amp alternator.
Cup Holder No
Width 59.5in. (151.1 cm)
Length 73.7 in. (187.2 cm)
Height 42.0 in. (106.7 cm)
Power Components
Speed Infinitely variable speed selection from 0– 6.2 mph (10 kmph) forward, 0–2.2 mph (3.5 kmph) reverse.
Engine Brand Kawasaki®
Engine Model FS600V
Engine Type Carbureted
Engine Series V-Twin
Engine Speed 3,600 rpm
Engine Displacement 603
Air Filter Standard Engine Manufacturer’s air filter
Drive Hydro-Drive
Drive Description Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1\” (2.54 cm) tapered shafts.
PTO Engagement Electromagnetic 105 ft-lbs clutch.
Fuel Capacity 5-gallon (18.9-L) fuel tank.
Fuel Indicator None
Deck Lift Manual lift with hairpin from hole to hole for position adjustment.
Carb Compliant No
Fuel Type Gas Carbureted
Decks
Deck Style Description Full-floating UltraCut Series 3, side discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength.
Deck Style Floating Deck
Width / Cutting Deck 48″
Cutting Heights 1.5″ (3.8 cm) to 4.5″ (11.4 cm) in 0.5″ (1.3 cm) increments.
Blades 3 Blades at 16.25″ Length
Blade Tip Speed Approximately 18,500 fpm.
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75″-diameter cutter housing with 25mm (.98″) diameter spindle shaft and splined blade driver.
Dimensions
Curb Weight 606